p PJD13N10 / pju13n10 march 10,2014-rev.00 page 1 100v n-channel mosfet voltage 100 v current 13 a features ? r ds(on) , v gs @10v,i d @6.5a<115m ? ? high power and current handing capability ? low gate charge ? lead free in compliance with eu rohs 2011/65/eu directive. ? green molding compound as per iec61249 std. (halogen free) mechanical data ? case: to-252, to-251ab package ? terminals: solderable per mil-std-750, method 2026 ? approx. weight: 0.0104 ounces, 0.297 grams(to-252) ? approx. weight: 0.0104 ounces, 0.297 grams(to-251ab) ? marking: d13n10(to-252), u13n10(to-251ab) maximum ratings and thermal characteristics (t a =25 o c unless otherwise noted) parameter symbol limit units drain-source voltage v ds 100 v gate-source voltage v gs + 20 v continuous drain current i d 13 a pulsed drain current i dm 52 a single pulse avalanche energy (note 1) e as 30 mj power dissipation t c =25 o c pd 34.7 w derate above 25 o c 0.28 w/ o c operating junction andstorage temperature range t j ,t stg -55~150 o c typical thermal resistance - junction to case - junction to ambient r jc r ja 3.6 110 o c/w ? limited only by maximum junction temperature
p PJD13N10 / pju13n10 march 10,2014-rev.00 page 2 electrical characteristics (t a =25 o c unless otherwise noted) parameter symbol test condition min. typ. max. units static drain-source breakdown voltage bv dss v gs =0v,i d =250ua 100 - - v gate threshold voltage v gs(th) v ds =v gs ,i d =250ua 1.5 2 2.5 v drain-source on-state resistance r ds(on) v gs =10v,i d =6.5a - 95 115 m ? v gs =4.5v,i d =2a - 105 140 zero gate voltage drain current i dss v ds =80v,v gs =0v - 0.02 1.0 ua gate-source leakage current i gss v gs =+ 16v,v ds =0v - + 4 + 10 ua diode forward voltage v sd i s =3a,v gs =0v - 0.8 1.1 v dynamic total gate charge q g v ds =50v, i d =10a, v gs =10v (note 2,3) - 20.4 - nc gate-source charge q gs - 3.2 - gate-drain charge q gd - 4.3 - input capacitance ciss v ds =30v, v gs =0v, f=1.0mhz - 906 - pf output capacitance coss - 63 - reverse transfer capacitance crss - 33 - switching turn-on delay time td (on) v ds =30v,rl=3 ? , v gen =10v, r g =6 ? (note 2,3) - 5 - ns turn-on rise time t r - 25 - turn-off delay time td (off) - 26 - turn-off fall time t f - 7 - drain-source diode maximum continuous drain-source diode forward current i s --- - - 3 a reverse recovery time trr v gs =0v, i s =3.5a di f / dt=100a/us (note 2) - 44 - ns reverse recovery charge qrr - 80 - nc notes : 1. l=0.3mh, i as =10a, v dd =25v, v gs =10v, r g =25ohm, starting t j =25 o c 2. pulse width< 300us, duty cycle< 2% 3. essentially independent of operating temperature typical characteristics.
p PJD13N10 / pju13n10 march 10,2014-rev.00 page 3 typical characteristic curves fig.1 output characteristics fig.2 transfer characteristics fig.3 on-resistance vs. drain current fig.4 on-resistsnce vs. junction temperature fig.5 on-resistance variation with vgs. fig.6 source-drain diode forward voltage
p PJD13N10 / pju13n10 march 10,2014-rev.00 page 4 typical characteristic curves fig.7 gate-charge characteristics fig.8 breakdown voltage variation vs. temperature fig.9 threshold voltage variation with temperature fig.10 capacitance vs. drain-source voltage fig.11 maximum safe operating area
p PJD13N10 / pju13n10 march 10,2014-rev.00 page 5 typical characteristic curves fig.12 normalized transient thermal impedance vs. pulse width
p PJD13N10 / pju13n10 march 10,2014-rev.00 page 6 packaging information . to-252 dimension unit: mm to-251ab dimension unit: mm
p PJD13N10 / pju13n10 march 10,2014-rev.00 page 7 part no packing code version mounting pad layout part no packing code package type packing type marking version PJD13N10_l2_00001 to-252 13? tape & reel d13n10 halogen free pju13n10_t0_00001 to-251ab tube packing u13n10 halogen free
p PJD13N10 / pju13n10 march 10,2014-rev.00 page 8 disclaimer reproducing and modifying information of the docum ent is prohibited without permission from panjit international inc.. panjit international inc. reserves the rights to ma ke changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liabilit y arising out of the application or use of any product including damages incidentally and consequentially occurred. panjit international inc. does not assume any and a ll implied warranties, includi ng warranties of fitness for particular purpose, non-infringement and merchantability. applications shown on the herein document are ex amples of standard use and o peration. customers are responsible in comprehending the suitable use in particul ar applications. panjit international inc. makes no representation or warranty t hat such applications will be suitable for the specified use without further testing or modification. the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace mach inery et cetera. customers using or selling these products for use in such applications do so at their ow n risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. since panjit uses lot number as the tracking ba se, please provide the lot number for tracking when complaining.
|
